More anterior bone loss in middle vertebra after contiguous two-segment cervical disc arthroplasty.

BACKGROUND: Contiguous two-segment cervical disc arthroplasty (CDA) is safe and effective, while post-operative radiographic change is poorly understood. We aimed to clarify the morphological change of the three vertebral bodies operated on. METHODS: Patients admitted between 2015 and 2020 underwent contiguous two-level Prestige LP CDA were included. The follow-up was divided into immediate post-operation (≤ 1 week), early (≤ 6 months), and last follow-up (≥ 12 months). Clinical outcomes were measured by Japanese Orthopedic Association (JOA) score, visual analogue score (VAS), and neck disability index (NDI). Radiographic parameters on lateral radiographs included sagittal area, anterior-posterior diameters (superior, inferior endplate length, and waist length), and anterior and posterior heights. Sagittal parameters included disc angle, Cobb angle, range of motion, T1 slope, and C2-C7 sagittal vertical axis. Heterotopic ossification (HO) and anterior bone loss (ABL) were recorded. RESULTS: 78 patients were included. Clinical outcomes significantly improved. Of the three operation-related vertebrae, only middle vertebra decreased significantly in sagittal area at early follow-up. The four endplates that directly meet implants experienced significant early loss in length. Sagittal parameters were kept within an acceptable range. Both segments had a higher class of HO at last follow-up. More ABL happened to middle vertebra. The incidence and degree of ABL were higher for the endplates on middle vertebra only at early follow-up. CONCLUSION: Our findings indicated that after contiguous two-segment CDA, middle vertebra had a distinguishing morphological changing pattern that could be due to ABL, which deserves careful consideration before and during surgery.

An NIR light-driven AgBiS2@ZIF-8 hybrid photocatalyst for rapid bacteria-killing.

Bacterial infection is the most common risk factor that causes the failure of implantation surgery. Therefore, the development of biocompatible implants with excellent antibacterial properties is of utmost importance. In this study, NIR light-driven AgBiS2@ZIF-8 hybrid photocatalysts for rapid bacteria-killing were prepared. AgBiS2@ZIF-8 exhibited excellent photocatalytic activity due to the rapid transfer of photoelectrons from AgBiS2 to ZIF-8, resulting in abundant reactive oxygen species (ROS) to kill bacteria. Meanwhile, AgBiS2@ZIF-8 exhibited a noteworthy photothermal effect, which could effectively convert NIR light into heat. Subsequently, the NIR light-driven antibacterial activity of AgBiS2@ZIF-8/Ti against S. aureus and E. coli was studied. The experimental results showed that AgBiS2@ZIF-8 displayed enhanced photodynamic therapy (PDT) and photothermal therapy (PTT) performance. Under irradiation with 808 nm NIR light for 10 min, AgBiS2@ZIF-8/Ti could effectively eliminate 98.55% of S. aureus in vitro, 99.34% of E. coli in vitro and 95% S. aureus in vivo. At the same time, AgBiS2@ZIF-8/Ti had good biocompatibility. Therefore, AgBiS2@ZIF-8/Ti showed potential as an antibacterial material, which provided a strategy to fight polymicrobial infections.

AgBiS2@CQDs/Ti nanocomposite coatings for combating implant-associated infections by photodynamic /photothermal therapy.

Biofilm-mediated implant-associated infections are one of the most serious complications of implantation surgery, posing a grave threat to patient well-being. Effectively addressing bacterial infections is crucial for the success of implantation procedures. In this study, we prepared a bismuth sulfide silver@carbon quantum dot composite coating (AgBiS2@CQDs/Ti) on a medical titanium surface by surface engineering design to treat implant-associated infections. The photocatalytic/photothermal activity test results confirmed the excellent photogenerated ROS and photothermal properties of AgBiS2@CQDs/Ti under near-infrared laser irradiation. In vitro antibacterial and in vivo anti-infection experiments showed that the coating combined with photodynamic and photothermal therapies to eradicate bacteria and disrupt mature biofilms under 1064 nm laser irradiation. Consequently, AgBiS2@CQDs/Ti shows promise as an implant coating for treating implant-associated infections post-surgery, thereby enhancing the success rate of implantation procedures. This study also provides a new idea for combating implant-associated infections.

Anterior cervical X-shape-corpectomy and fusion vs. anterior cervical corpectomy and fusion for two-level cervical spondylosis.

PURPOSE: Anterior cervical X-shape-corpectomy and fusion (ACXF) is a novel cervical surgery, designed as partial alternative to the classic technique, anterior cervical corpectomy and fusion (ACCF). The aim of this study was to evaluate the early-stage outcomes of ACXF in treating two-level cervical spondylosis (CS) through comparisons with ACCF. METHODS: A retrospectively comparative study was conducted in two cohorts of patients who underwent single-vertebral ACXF or ACCF to treat two-level CS during September 2019 and October 2021. Clinical and radiological data of all the patients were collected from pre-operation to 1 year after the surgery, following by intra- and intergroup analyses and comparisons. RESULTS: Fifty-seven patients were included, with 24 undergoing ACXF and 33 undergoing ACCF. ACXF group had significantly shorter drainage duration (2.13 ± 0.61 days vs. 3.48 ± 1.30 days, P < 0.001) and less drainage volume (30.21 ± 26.88 ml vs. 69.30 ± 37.65 ml, P < 0.001) than ACCF group. Both techniques significantly improved all the clinical parameters (P < 0.01) with comparable effects (P > 0.05). Each complication rate in ACXF group was lower than that in ACCF group without significant difference (P > 0.05). ACXF showed a significantly smaller transverse decompression range than ACCF (11.93 ± 1.27 mm vs. 16.29 ± 1.88 mm, P < 0.001). Postoperatively, ACXF yielded a comparable fusion rate (P > 0.05) and a significantly lower subsidence rate (P < 0.01) than ACCF technique at all time points. CONCLUSIONS: ACXF is a potential surgical alternative for certain patients with two-level CS, as it provides both adequate decompression range and fewer adverse events than ACCF. The further modifications on ACXF worth exploration.

Clinical evaluation of a multiplex droplet digital PCR for pathogen detection in critically ill COVID-19 patients with bloodstream infections.

BACKGROUND: Nosocomial bloodstream infections (nBSI) have emerged as a clinical concern for physicians treating COVID-19 patients. In this study, we aimed to evaluate the effectiveness of a multiplex ddPCR in detecting bacterial pathogens in the blood of COVID-19 critically ill patients. METHODS: This prospective diagnostic study included RT-PCR-confirmed COVID-19 patients admitted to our hospital from December 2022 to February 2023. A multiplex ddPCR assay was used to detect common bacterial pathogens and AMR genes in blood samples of the patients, along with antimicrobial susceptibility testing (AST). The diagnostic performance of the ddPCR assay was evaluated by comparing the results with those obtained through blood culture and clinical diagnosis. Additionally, the ability of ddPCR in detecting bacterial resistance was compared with the AST results. RESULTS: Of the 200 blood samples collected from 184 patients, 45 (22.5%) were positive using blood culture, while 113 (56.5%) were positive for bacterial targets using the ddPCR assay. The ddPCR assay outperformed blood culture in pathogen detection rate, mixed infection detection rate, and fungal detection rate. Acinetobacter baumannii and Klebsiella pneumoniae were the most commonly detected pathogens in COVID-19 critically ill patients, followed by Enterococcus and Streptococcus. Compared to blood culture, ddPCR achieved a sensitivity of 75.5%, specificity of 51.0%, PPV of 30.9%, and NPV of 87.8%, respectively. However, there were significant differences in sensitivity among different bacterial species, where Gram-negative bacteria have the highest sensitivity of 90.3%. When evaluated on the ground of clinical diagnosis, the sensitivity, specificity, PPV and NPV of ddPCR were 78.1%, 90.5%, 94.7%, and 65.5%, respectively. In addition, the ddPCR assay detected 23 cases of blaKPC, which shown a better consistent with clinical test results than other detected AMR genes. Compared to blaKPC, there were few other AMR genes detected, indicating that the application of other AMR gene detection in the COVID-19 critically ill patients was limited. CONCLUSION: The multiplex ddPCR assay had a significantly higher pathogen detection positivity than the blood culture, which could be an effective diagnostic tool for BSIs in COVID-19 patients and to improve patient outcomes and reduce the burden of sepsis on the healthcare system, though there is room for optimization of the panels used.- Adjusting the targets to include E. faecalis and E. faecium as well as Candida albicans and Candida glabrata could improve the ddPCR' s effectiveness. However, further research is needed to explore the potential of ddPCR in predicting bacterial resistance through AMR gene detection.

Occurrence and Characterization of Sclerotinia sclerotiorum Causing Fruit Rot on Sweet Cherry in Southern China.

Sweet cherry (Prunus avium L.) is widely planted in northern China due to its high economic value, and its cultivation has gradually spread south to warm regions. However, fruit rot, observed on the young fruits, poses a considerable threat to the development of sweet cherry. To determine the causal agent, morphological observation, molecular identification, and pathogenicity tests were performed on isolates obtained from diseased fruits. As a result, Sclerotinia sclerotiorum was identified as the pathogen. Pathogenicity tests on different sweet cherry cultivars indicated that 'Summit' was highly sensitive to S. sclerotiorum, whereas 'Hongmi' showed significant resistance. Besides sweet cherry, S. sclerotiorum could also infect other vegetable crops we tested, such as cowpea, soybean, tomato, and chili. Fungicide sensitivity and efficacy assays showed that both fludioxonil and pyraclostrobin can effectively inhibit the mycelial growth of S. sclerotiorum and decrease disease incidences on the young fruits of sweet cherry. Furthermore, genome sequencing resulted in a 37.8 Mb assembly of S. sclerotiorum strain ScSs1, showing abundant SNPs, InDels, and SVs with the genome of S. sclerotiorum reference strain 1980 UF-70. The above results provide an important basis for controlling the fruit rot of sweet cherry caused by S. sclerotiorum in China.

Transcriptome Analysis Reveals the Molecular Mechanism and Responsive Genes of Waterlogging Stress in Actinidia deliciosa Planch Kiwifruit Plants.

Waterlogging stress is one of the major natural issues resulting in stunted growth and loss of agricultural productivity. Cultivated kiwifruits are popular for their rich vitamin C content and unique flavor among consumers, while commonly sensitive to waterlogging stress. The wild kiwifruit plants are usually obliged to survive in harsh environments. Here, we carried out a transcriptome analysis by high-throughput RNA sequencing using the root tissues of Actinidia deliciosa (a wild resource with stress-tolerant phenotype) after waterlogging for 0 d, 3 d, and 7 d. Based on the RNA sequencing data, a high number of differentially expressed genes (DEGs) were identified in roots under waterlogging treatment, which were significantly enriched into four biological processes, including stress response, metabolic processes, molecular transport, and mitotic organization, by gene ontology (GO) simplify enrichment analysis. Among these DEGs, the hypoxia-related genes AdADH1 and AdADH2 were correlated well with the contents of acetaldehyde and ethanol, and three transcription factors Acc26216, Acc08443, and Acc16908 were highly correlated with both AdADH1/2 genes and contents of acetaldehyde and ethanol. In addition, we found that there might be an evident difference among the promoter sequences of ADH genes from A. deliciosa and A. chinensis. Taken together, our results provide additional information on the waterlogging response in wild kiwifruit plants.

Overloaded vertebral body: a unique radiographic phenomenon following multilevel anterior cervical discectomy and fusion.

PURPOSE: Because previous studies have not focused on postoperative cervical collapse, the purpose of the present study was to introduce the overloaded vertebral body (OVB) phenomenon following multilevel zero-profile anterior cervical discectomy and fusion (ACDF) as well as to investigate its effects on radiographic outcomes. METHODS: We conducted a retrospective study involving patients who underwent ACDF. A total of 55 patients were included in the analysis, including 110 OVB and 110 non-OVB. The evaluated vertebral parameters included the vertebral cross-sectional area (CSA), wedge angle (WA), vertebral height [anterior (AH) and posterior (PH)] and anterior-posterior vertebral diameter [upper (UD) and lower (LD)]. RESULTS: The CSA and WA were significantly lower in the OVB group than in the non-OVB group at 3, 6, and 12 months after surgery as well as at the final follow-up (p < 0.01). The AH of the OVB group was significantly lower at 3, 6, and 12 months after surgery as well as at the final follow-up compared to 1 week after surgery (p < 0.01). CONCLUSIONS: OVB, a new phenomenon following multilevel ACDF, is defined as the cervical vertebral body located in the middle of the surgical segments in multilevel anterior cervical spine surgery. Statistical analysis of vertebral parameters, including CSA, WA, AH, PH, UD, and LD, showed that OVB occurs mainly at the anterior edge of the vertebra and that its largest radiographic manifestation is the loss of height at the anterior edge of the vertebra in the early postoperative period.

Cervical Disc Arthroplasty for the Treatment of Noncontiguous Cervical Degenerative Disc Disease: Results of Mid- to Long-Term Follow-up.

OBJECTIVE: The long-term results of cervical disc arthroplasty (CDA) for noncontiguous cervical degenerative disc disease (CDDD) are still uncertain. Moreover, it is unclear whether CDA delays or avoids the degeneration of the intermediate segment (IS), leading to controversy in the field. Therefore, this study aimed to investigate the mid- to long-term clinical and radiographic outcomes of CDA in treating noncontiguous CDDD and to explore whether the IS degenerated faster after CDA than other non-surgically treated adjacent segments. METHODS: We retrospectively analyzed patients with noncontiguous CDDD who underwent CDA in our department between January 2008 and July 2018. The patients were divided into the CDA and hybrid surgery (HS) groups, and clinical and radiographic outcomes were evaluated at routine postoperative intervals. Clinical outcomes were assessed using the Japanese Orthopaedic Association (JOA), neck disability index (NDI), and visual analogue scale (VAS), while radiographic outcomes included cervical lordosis (CL), C2-C7 range of motion (ROM), segmental ROM, and disc angle (DA) at the arthroplasty level. Complications were also evaluated.Pre- and postoperative values were compared using paired t-tests or Wilcoxon rank-sum tests. Independent Student t-tests or Mann-Whitney U tests analyzed continuous data between CDA and HS groups, while chi-square or Fisher exact tests assessed categorical data. RESULTS: Sixty-four patients with noncontiguous CDDD, with 31 in the CDA group and 33 in the HS group, were evaluated. The mean follow-up time was over 70 months. The most frequently involved levels were C4/5 and C5/6. Both groups showed significant improvements in JOA, NDI, and VAS values after surgery. Although CL was maintained, the CL in the CDA group was consistently lower than that in the HS group (p < 0.05). There was a significant decrease in C2-C7 ROM (p < 0.05), but at the last follow-up, the C2-C7 ROM in the CDA group was greater than that in the HS group (p < 0.05). At the last follow-up, 44.3% of arthroplasty levels had developed heterotopic ossification (HO), and 48.45% had developed anterior bone loss (ABL). In addition, adjacent segment degeneration (ASDeg) was observed in the IS (22.7%), superior adjacent segment (20.6%)and inferior adjacent segment (21.9%). CONCLUSION: CDA or CDA combined with fusion are viable treatments for noncontiguous CDDD, with satisfactory outcomes after mid-to-long-term follow-up. ASDeg is similar in non-surgical segments after 70 months of follow-up. ROM of the IS issimilar to preoperative levels, indicating CDA does not increase the risk of IS degeneration.

Self-healing hydrogels for bone defect repair.

Severe bone defects can be caused by various factors, such as tumor resection, severe trauma, and infection. However, bone regeneration capacity is limited up to a critical-size defect, and further intervention is required. Currently, the most common clinical method to repair bone defects is bone grafting, where autografts are the "gold standard." However, the disadvantages of autografts, including inflammation, secondary trauma and chronic disease, limit their application. Bone tissue engineering (BTE) is an attractive strategy for repairing bone defects and has been widely researched. In particular, hydrogels with a three-dimensional network can be used as scaffolds for BTE owing to their hydrophilicity, biocompatibility, and large porosity. Self-healing hydrogels respond rapidly, autonomously, and repeatedly to induced damage and can maintain their original properties (i.e., mechanical properties, fluidity, and biocompatibility) following self-healing. This review focuses on self-healing hydrogels and their applications in bone defect repair. Moreover, we discussed the recent progress in this research field. Despite the significant existing research achievements, there are still challenges that need to be addressed to promote clinical research of self-healing hydrogels in bone defect repair and increase the market penetration.

Cervical collar use following anterior cervical hybrid surgery: protocol for a prospective randomized, time-controlled trial.

INTRODUCTION: Cervical hybrid surgery (HS) combines anterior cervical discectomy and fusion (ACDF) and cervical disc arthroplasty (CDA) to establish an individualized surgical plan for patients with multiple cervical disc degenerative diseases. In order to maintain the stability of the spine after HS, an external cervical collar is often used. However, there is still controversy regarding the importance of a cervical collar following surgery. This study aims to determine whether the cervical collar is effective and how long it should be worn after surgery. METHODS: This is a randomized, single-center, prospective, parallel-controlled trial. Eligible participants will be selected according to the inclusion and exclusion criteria. The primary outcome is the neck disability index, which will be evaluated before surgery and at one week, 3 weeks, 6 weeks, 3 months, 6 months, and 12 months following surgery. The secondary outcomes consist of the Japanese Orthopedic Association Scores, MOS 36-item short-form health survey (SF-36), visual analog scale, Pittsburgh Sleep Quality Index (PSQI), Bazaz dysphagia scoring system, Falls Efficacy Scale, cervical collar satisfaction score, neck soft tissue assessment, and Braden Scale, as well as radiologic assessments for cervical lordosis, disc height of the operative levels, fusion rate, range of motion (ROM), and complications including anterior bone loss, prosthesis migration, and heterotopic ossification. The clinical and radiologic examinations were performed by investigators with no therapeutic relationship with the individual patient. All radiographs were examined by one independent radiologist. ETHICS AND DISSEMINATION: The results of this study will be published in peer-reviewed journals and presented at conferences. Upon completion of this trial, our findings could provide an appropriate cervical collar-wearing guideline for patients receiving HS. TRIAL REGISTRATION: ChiCTR.org.cn ChiCTR2000033002. Registered on 2020-05-17.

Cervical sagittal balance after consecutive three-level hybrid surgery versus anterior cervical discectomy and fusion: radiological results from a single-center experience.

INTRODUCTION: According to the different numbers and relative locations of cervical disc replacement (CDR) and anterior cervical discectomy and fusion (ACDF), three-level hybrid surgery (HS) has many constructs. The purpose of this retrospective study was to compare the sagittal alignment parameters of HS and ACDF for cervical degenerative disc disease (CDDD) and the association of the respective parameters. METHODS: This study involved patients with three-level CDDD who underwent ACDF or HS at our institution between June 2012 and August 2021. This follow-up included one-level CDR and two-level ACDF (type I group), two-level CDR and one-level ACDF (type II group) and three-level ACDF. Cervical sagittal alignment parameters included cervical lordosis (CL), segment alignment (SA), T1 slope (T1S), C2-C7 sagittal vertical axis (SVA), T1S-CL, C2 slope (C2S), occipital to C2 angle (O-C2A) and segment range of motion (ROM). Postoperative complications included adjacent segment degeneration, imbalance, prosthetic subsidence and heterotopic ossification. RESULTS: The three groups with a total of 106 patients were better matched in terms of demographics. Patients who underwent HS had significantly higher CL than those who underwent ACDF at 1 week, 6 months, 12 months and the final follow-up after surgery, as well as significantly better SA at 12 months and the final follow-up. There was no significant difference in T1S, SVA, T1S-CL, C2S, O-C2A or segment ROM among the three groups after surgery. The T1S-CL was significantly associated with C2S in the type I and type II groups at the preoperative and final follow-up. There was no significant difference in postoperative complications among the three groups. CONCLUSIONS: Most improvements in cervical sagittal alignment (CL, SA, T1S, SVA, T1S-CL, C2S, O-C2A, and segmental ROM) were observed in all three groups postoperatively. HS was more advantageous than ACDF in the maintenance of postoperative CL and SA. Thus, three-level HS may be better for maintaining cervical curvature. The number of replacement segments differed in those who underwent HS but did not affect the correlation between T1S-CL and C2S, both of which are well balanced.

Impact of bone-implant gap size on the interfacial osseointegration: an in vivo study.

BACKGROUND: The bone-implant gap resulted from morphological mismatch between cervical bony endplates and implant footprint may have adverse impact on bone-implant interfacial osseointegration of cervical disc arthroplasty (CDA). The purpose of the study was to evaluate the impact of bone-implant gap size on the interfacial osseointegration in a rabbit animal model. METHODS: A series of round-plate implants with different teeth depth (0.5 mm, 1.0 mm, 1.5 mm and 2.0 mm) was specifically designed. A total of 48 New Zealand white rabbits were randomly categorized into four groups by the implants they received (0.5 mm: group A, 1.0 mm: group B, 1.5 mm: group C, 2.0 mm: group D). At 4th and 12th week after surgery, animals were sacrificed. Micro-CT, acid fuchsin and methylene blue staining and hematoxylin and eosin (HE) staining were conducted. RESULTS: At 4th week and 12th week after surgery, both micro-CT and HE staining showed more new bone formation and larger bone coverage in group A and group B than that in group C and group D. At 12th week, the bone biometric parameters were significantly superior in group C when compared with group D (p < 0.05). At 12th week, hard tissue slicing demonstrated larger portion of direct contact of new bone to the HA coating in group A and group B. CONCLUSIONS: Bone-implant gap size larger than 1.0 mm negatively affected bone-implant osseointegration between compact bone and HA coated implant surface.

[Research progress on rodent models of cervical spinal cord injury].

Objective: To summarize the research progress on rodent models of cervical spinal cord injury (SCI). Methods: The relevant domestic and foreign literature in recent years was reviewed, the methods of establishing the rodent models of cervical SCI and the evaluation methods of behavior, imaging, neuroelectrophysiology, and histology were summarized. Results: Cervical SCI involves primary and secondary injuries. Primary cervical SCI can be simulated with contusion, contusion compression, fracture dislocation, spinal cord traction, and spinal cord transection; scondary cervical SCI can be simulated with photochemical model and excitotoxicity model. Certain evaluation methods such as behavior, imaging, neuroelectrophysiology, and histology are used to evaluation during model building and research. Conclusion: Different rodent models of cervical SCI have different advantages and application directions, and it is critical importance for the study of cervical SCI to establish effective animal models.

Cervical disc arthroplasty combined with two-level ACDF for the treatment of contiguous three-level cervical degenerative disc disease: A comparative study.

To compare the differences among constructs with one-level cervical disc arthroplasty (CDA) and two-level anterior cervical discectomy and fusion (ACDF). A retrospective study was conducted involving patients who underwent one-level CDA and two-level ACDF between June 2012 and July 2020. According to the different locations of CDA and ACDF, we divided the constructs into three types: type Ⅰa: CDA-ACDF-ACDF; type Ⅰb: ACDF-CDA-ACDF; type Ⅰc: ACDF-ACDF-CDA. The differences of clinical and radiological outcomes were evaluated. Fifty-three patients were included with 29 in type Ⅰa group, 11 in type Ⅰb group, and 13 in type Ⅰc group. After surgery, all groups showed significant improvement in apanese Orthopedic Association, Neck Disability Index, and Visual Analog Scale scores (p < 0.001). Range of motion (ROM) of the total cervical spine in type Ⅰc group decreased significantly compared with those in type Ⅰa and type Ⅰb groups (p < 0.05). No significant differences in ROM of the arthroplasty segment and the variations in ROM of the superior adjacent segment were observed among the three groups. The fusion rates of the superior ACDF segments were significantly higher at 6 and 12 months postoperatively than those of the inferior ACDF segments (p < 0.05). The clinical outcomes were similar among constructs concerning different locations of CDA and ACDF in three-level hybrid surgery. ROM of the cervical spine in type Ⅰc group decreased significantly compared with that in type Ⅰa and type Ⅰb groups. The fusion rates of superior ACDF segments were higher at early time points after surgery than those of inferior ACDF segments.

Influence of circulating nesfatin-1, GSH and SOD on insulin secretion in the development of T2DM.

Aims: To evaluate the correlation of nesfatin-1, GSH and SOD levels with ß-cell insulin secretion and their influence on insulin secretion in the development of type 2 diabetes mellitus (T2DM). Materials and methods: 75 patients with T2DM, 67 with prediabetes and 37 heathy participants were recruited in this study. Serum levels of nesfatin-1, GSH and SOD were quantified and statistically analyzed. Results: The levels of nesfatin-1, GSH and SOD in T2DM were significantly decreased (P < 0.001) compared to either in prediabetes or in healthy control, and significant reduction of these biomarkers was also observed in prediabetes when compared to the control (P < 0.001). Circulating nesfatin-1, GSH and SOD were not only strongly correlated with ß-cell insulin secretion, but also exerted remarkable influence on the secretion. Conclusion: Serum nesfatin-1, GSH and SOD are important factors involving insulin secretion in the development of T2DM, which may help provide new ideas for forthcoming investigations on the roles of these factors in pathogenesis of T2DM, as well as for active prediction and prevention of prediabetes before it develops into overt T2DM.

Fatty infiltration in cervical extensor muscle: is there a relationship with cervical sagittal alignment after anterior cervical discectomy and fusion?

PURPOSE: To investigate the relationship between the preoperative paraspinal Goutalier grade of fatty infiltration and postoperative cervical sagittal alignment in patients undergoing anterior cervical discectomy and fusion (ACDF). METHODS: A total of 101 patients who underwent single-level ACDF with the Zero-profile implant system between March 2011 and April 2020 were included in this study. Cervical sagittal alignment parameters, including the C2-C7 Cobb angle, functional spinal unit (FSU) angle, cervical sagittal vertical axis (SVA), and T1 slope (T1S), were assessed. Preoperative magnetic resonance images were used to classify patients according to Goutalier grade. Clinical outcomes including Neck Disability Index (NDI) scores, Japanese Orthepaedic Association (JOA) scores and Visual Analogue Scale (VAS) scores were collected and analyzed. RESULTS: According to the Goutalier grade, 33 patients were classified as Goutalier 0-1 (Group A), 44 were classified as Goutalier 1.5-2 (Group B), and 24 were classified as Goutalier 2.5-4.0 (Group C). The mean age among the three groups showed significant differences (P = 0.007). At the last follow-up, the C2-C7 Cobb angle, FSU angle, and T1S improved after the surgery among the groups. Although there were varying degrees of loss of curvature among the different groups during the follow-up period, the postoperative cervical sagittal alignment parameters demonstrated no statistical differences among the three groups (P > 0.05). In addition, patients in all groups experienced significant relief of their symptoms, and the clinical scores were comparable among the groups (P > 0.05). CONCLUSION: The complex nature of anterior cervical surgery requires surgical attention both in decompression and sagittal alignment. Our study demonstrates satisfactory postoperative cervical sagittal alignment of patients despite different grades of fatty infiltration of the multifidus muscle following single-level ACDF. Based on our results, the improvement and maintenance of cervical sagittal alignment after ACDF remains a complex problem that spine surgeons should consider before surgery.

Single-level cervical disc arthroplasty in the spine with reversible kyphosis: A finite element study.

Background: Our previous studies found the single-level cervical disc arthroplasty (CDA) might be a feasible treatment for the patients with reversible kyphosis (RK). Theoretically, the change of cervical alignment from lordosis to RK comes with the biomechanical alteration of prostheses and cervical spine. However, the biomechanical data of CDA in the spine with RK have not been reported. This study aimed at establishing finite element (FE) models to (1) explore the effects of RK on the biomechanics of artificial cervical disc; (2) investigate the biomechanical differences of single-level anterior cervical discectomy and fusion (ACDF) and CDA in the cervical spine with RK. Methods: The FE models of the cervical spine with lordosis and RK were constructed, then three single-level surgical models were developed: (1) RK + ACDF; (2) RK + CDA; (3) lordosis + CDA. A 73.6-N follower load combined with 1 N·m moment was applied at the C2 vertebra to produce cervical motion. Results: At the surgical level, "lordosis + CDA" had the greatest ROM (except for flexion) while "RK + ACDF" had the minimum ROM. However, at adjacent levels, the ROM of "RK + ACDF" increased by 4.05% to 38.04% in comparison to "RK + CDA." "RK + ACDF" had the greatest prosthesis interface stress, while the maximum prosthesis interface stress of "RK + CDA" was at least 2.15 times higher than "lordosis + CDA." Similarly, "RK + ACDF" had the greatest intradiscal pressure (IDP) at adjacent levels, while the IDP of "RK + CDA" was 1.6 to 6.7 times higher than "lordosis + CDA." At the surgical level, "RK + CDA" had the greatest facet joint stress (except for extension), which was 1.9 to 11.2 times higher than "lordosis + CDA." At the adjacent levels, "RK + CDA" had the greatest facet joint stress (except for extension), followed by "RK + ACDF" and "lordosis + CDA" in descending order. Conclusions: RK significantly changed the biomechanics of CDA, which is demonstrated by the decreased ROM and the significantly increased prosthesis interface stress, IDP, and facet joint stress in the "RK + CDA" model. Compared with ACDF, CDA overall exhibited a better biomechanical performance in the cervical spine with RK, with the increased ROM of surgical level and facet joint stress and the decreased ROM of adjacent levels, prosthesis interface stress, and IDP.

Classification of three-level hybrid surgery for the treatment of cervical degenerative disc disease: a retrospective study of 108 patients.

INTRODUCTION: According to the different numbers and locations of cervical disc arthroplasty (CDA) and anterior cervical discectomy and fusion (ACDF), three-level hybrid surgery (HS) has many constructs. The purpose of the present study was to introduce a classification system for three-level HS and compare the two types with each other and with ACDF. METHODS: A retrospective study was conducted involving patients with three-level cervical degenerative disc disease (CDDD) who underwent ACDF or HS in our hospital between June 2012 and May 2019. According to the different numbers and locations of ACDFs and CDAs, we classified the three-level HS into two types (type I: one-level CDA and two-level ACDF, and type II: two-level CDA and one-level ACDF). The differences of clinical and radiological outcomes were compared with each other and with three-level ACDF. RESULTS: A total of 108 patients were analyzed. The Neck Disability Index (NDI) of the ACDF group at 3 months postoperatively was significantly higher than that in the type I and type II groups (p < 0.05). The cervical lordosis was significantly lower in the ACDF group than that in the type I and II groups at 3 days, 6, 12 months postoperatively and the final follow-up (p < 0.05). The range of motion (ROM) of the total cervical spine decreased significantly in all three groups at 3, 6, and 12 months postoperatively and at the final follow-up (p < 0.05). The ACDF group was observed with the most severe loss of ROM of the total cervical spine, followed by the type I group. The type II group could preserve the most ROM of the total cervical spine. The ROM of adjacent segments increased most in the ACDF group, followed by the type I group. CONCLUSIONS: Compared with ACDF, three-level HS may yield a faster recovery rate and superior radiological outcomes, such as a superiority in maintaining the cervical curvature and ROM of the total cervical spine and a smaller increase in the ROM of adjacent segments. The advantages were most remarkable in the type II group.

The Variation and Correlation of Serum Adiponectin, Nesfatin-1, IL-6, and TNF-α Levels in Prediabetes.

Background: The variation and correlation among adiponectin, nesfatin-1, tumor necrosis factor α (TNF-α), and interleukin 6 (IL-6), which may be involved in the development of the decline of health into prediabetes and diabetes, have not been elucidated. This study aims to investigate the roles of these cytokines in this process. Methods: Seventy-two type 2 diabetes mellitus (T2DM) patients, 75 prediabetics, and 72 healthy individuals were enrolled in our case control study. Serum adiponectin, nesfatin-1, TNF-α, and IL-6 were tested with appropriate kits, and primary data were analyzed with correct methods. Results: Serum levels of each cytokine in patients with prediabetes were between T2DM and the healthy, and significant differences were found among them. TNF-α and nesfatin-1 levels in T2DM were obviously different compared to prediabetes or the healthy; IL-6 and adiponectin levels in the healthy group were significantly changed in contrast to prediabetes or T2DM. Correlation analysis found that in prediabetics, adiponectin was positively correlated with TNF-α (R = 0.2939, P = 0.0105) and IL-6 (R = 0.3918, P = 0.0005), and their relationship was greatly strengthened in prediabetes accompanied by insulin resistance (TNF-α: R = 0.7732, P < 0.0001, IL-6: R = 0.6663, P = 0.0005). We also demonstrated that declined adiponectin (OR = 6.238, P = 0.019) and nesfatin-1 (OR = 2.812, P = 0.01) and elevated TNF-α (OR = 5.541, P = 0.001) were risk factors for prediabetes toward diabetes. Conclusions: This research proved significant variations of adiponectin, nesfatin-1, IL-6, and TNF-α levels in the healthy, prediabetics, and T2DM, suggesting a slow and gradual change during the progression from a healthy condition toward diabetes via prediabetes.